Basic Info.
After-sales Service
Provided
Heating Mode
Transmission
Material Status
Granule, Powder, Solution, Cream, Strap, Bulk
Drying Medium
Inactive Gas, Superheated Steam, Effluent Gas, Air
Operation Pressure
Atmospheric Pressure
Transport Package
Wooden Case
Specification
according the size of machine
Origin
Changzhou, Jiangsu
Product Description
fruit and vegetable belt dryer drying machine machine
Tray dryer Principle:
The CT-C Tray dryer support to use steam, electric, gas or oil as heating resource . The laminar air flow passes through the drying trays and carry out the heat transmission to drying raw material.Fresh air is introduced, hot damp air is discharged continuously as the same time. In this way, Appropriate RH in dryer can be maintained. The ultimate advantage of dryer is that most hot air is re-cycled inside, it increases heat transmission and saves energy. It makes heat efficiency of dryer raise from 3-8% of traditional drying oven up to about 35-50%. The dryer adopt reinforced ventilation to decrease temperature difference. User can adjust air distributor in order to make the temperature difference at the best state.
CT-C tray dryer adopt low noise high temperature resistant axial fan and also equips with automatic constant temperature control system, system control system for customer's choice.
Tray dryer Feature:
1.There are four kinds of heating resource for choice: steam, electricity, heat conducting oil, both steam and electricity.
2.The temperature (steam heating): 50-150ºC .
3.The temperature (when using electricity and far-infrared): 50-350ºC
4.The automatic control system or the control system is selectable.
5.Normally used steam pressure 0.2-0.8 MPa (2-8kg/cm 2 ). Standard electric heating is 15kw for type CT-1,CT-C-1, easy flammable and explosive material is forbidden.
6.The special requirements should be indicated at the time of order.
7.The price for the non-standard oven should be consulted. If the operation temperature is more than 140ºC or less than 60ºC it should be indicated at the time of order.
8.The oven and baking tray made by our factory are uniform in the dimensions, and can be exchanged with each other.
Drying tray dimensions: 460*640*45mm.Explosive-proof motor and control cabinet as option.
We will match the different kinds of trays for different material,please check the below trays.
The tray with hole and not with hole,the mesh type,no-stciky etc.
Tray dryer Technical sheetType | Capacity (kg/batch) | Power (kw) | Steam consumption (kg/h) | Heating radiation area(m 2 ) | Amount of air (m 3 /h) | Temperature gap between top and bottom (ºC) | Drying tray | Overall size (LxWxH)mm | Drying Trolley |
CT-C-0 | 25 | 0.45 | 5 | 5 | 3400 | ±2 | 16 | 1480 x 1100 x 1750 | 0 |
CT-C-IA | 50 | 0.45 | 10 | 10 | 3400 | ±2 | 24 | 1400 x 1200 x 2000 | 1 |
CT-C-I | 100 | 0.45 | 18 | 20 | 3450 | ±2 | 68 | 2300 x 1200 x 2000 | 2 |
CT-C-II | 200 | 0.9 | 36 | 40 | 6900 | ±2 | 96 | 2300 x 2200 x 2000 | 4 |
CT-C-III | 300 | 1.35 | 54 | 120 | 10350 | ±2 | 144 | 2300 x 3220 x 2000 | 6 |
CT-C-IV | 400 | 1.8 | 72 | 160 | 13800 | ±2 | 192 | 4460 x 2200 x2290 | 8 |
Spare parts of the Tray dryer
Tray dryer application:It is suitable for heat curing and drying and dehydration of materials and products of pharmaceutical, chemical, food, agricultural, aquatic, light industry and heavy industry, such as bulk drug, crude drug, Chinese medicine decoction pieces, extractums, powders, granules, electuaries, water-bindered pills, packing bottle, pigment dyes, dehydrated vegetables, dried fruit, sausages, plastic resin, electric elements, drying varnish and so on.
Package:
Jinling profile:
Jiangsu Jinling Drying Technology Co., Ltd. was founded in 2000, as an innovation-oriented enterprise specialized in advanced technology.We have over 30 years of experience in machine manufacturing. Jinling has been developing through years of investments in domestic and international technologies, as well as cooperation with scientific research institutions such as Southeast University, Jiangnan University,Changzhou University, Sinopec, Tsinghua University to design, develop, and optimize the professional drying equipment and environmental equipment we produce. We have achieved more than fifty national level patents and ten provincial level certificates for new high-tech products.More than ten of these products are recognized domestically as advanced equipment. In 2008, we were one of the first in the industry who were ranked as high-tech enterprises nationwide. There are more than 120 employees in our factory, including a core team with over30 years of experience in the field of drying and environmental equipment. We also have advanced manufacturing and processing equipment.Jinling is being an enterprise of innovation, not just manufacturing. With the principle of professionalism, practicality, innovation and value, we are trying our best to learn advanced technology and gain management experience, so that we can further advance our manufacturing processes, improve our product quality, and enhance our corporate reputation.Jinling is the qualified manufacturer of special pressure vessel, established the biggest drying & granulating testcenter in China, and passed the examination of ISO 9001, ISO 14001, OHSAS18001 and CE certification.Jinling's equipment has been spread all over China and has been exported to over 40 countries, Jinling is collaborated closely with dozens of listed facotories and to be authorized supplier of many world top 500 transnational corporations.
Jinling is professionally engaged in designing, manufacturing over 30 series of drying equipment, environmental protection equipment, evaporation & concentration equipment and dry granulation equipment which are widely used for environmental protection field, chemical field, food field, pharmaceutical field, national defense field etc.Our serives:Pre-service
Act as a good adviser and assistant of clients to enable them get rich and generous returns on their investments.
1. Introduce the product to the customer in detail, answer the question raised by customer carefully;
2.Make plans for choice according to the needs and special requirements of users in different sectors;
Sale service
1. Ensure product with high quality and pre-degugging before delivery;
2. Delivery on time;
3.Provide full set of documents meet customer's requirements.
After-sale service
Provide considerate services to minimize clients' worries.
1.Assist clients to prepare for the first construction scheme;
2.Install and debug the equipment;
3.Train the first-line operators;
4. Examine the equipment;
5.Take initiative to eliminate the troubles rapidly;
6.Provide technical support;
7.Establish long-term and friendly relationship.
Service commitment
1. Provide clients one-year warranty to make sure the machine work well;
2.We always keep certain inventory level of spare parts, which means the replacements can be sent to you timely
Certifications:
FAQ: 1. Q: Jiangsu Jinling Drying Technology Co., Ltd is a manufacturer, trading company or a third party?
A: We are a manufacturer, Our company established in 2000.
2. Q: Where is your factory located?
A: Jinling is located in Changzhou city, Jiansu province, China. it is In the middle of Shanghai and Nanjing.
3. Q: How can I go to your factory?
A: You can fly to shanghai Pudong or Hongqiao international airport directly, then take the high speed train to Changzhou station (just 1 hour from Shanghai to Changzhou by train) and we arrange to pick you up at Changzhou station to go to our company. Yutong company is around 30km away from Changzhou station.
If you are in China now, you can fly to Changzhou Benniu airport, or take train or bus to Changzhou city directly .
We sincerely welcome to visit our company at any time.
Address:
No. 501, Changhe Road, Zhenglu Town, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Manufacturing & Processing Machinery
Company Introduction:
Welcome to Jiangsu Jinling Drying Technology Co., Ltd. We are a reputable expert in the filed of drying equipment, located in China. Jiangsu Jinling Drying Technology Co., Ltd. Was founded in 2000, as an innovation-oriented enterprise specialized in advanced technology. We have over 20 years of experience in machine manufacturing. Our company has been developing through years of investments in domestic and international technologies, as well as cooperation with scientific research institutions such as Southeast University, Jiangnan University, Changzhou University, Sinopec, Tsinghua University to design, develop, and optimize the professional drying equipment and environmental equipment we produce. We have achieved more than fifty national level patents and ten provincial level certificates for new high-tech products. More than ten of these products are recognized domestically as advanced equipment. In 2008, we were one of the first companies in the industry who were ranked as high-tech enterprises nationwide. There are more than 120 employees in our company, including a core team with over 30 years of experience in the field of drying and environmental equipment. We also have advanced manufacturing and processing equipment. Our company is committed to being an enterprise of innovation, not just manufacturing. With the principle of professionalism, practicality, innovation and value, we are trying our best to learn advanced technology and gain management experience, so that we can further advance our manufacturing processes, improve our product quality, and enhance our corporate reputation.
Our company specializes in the production of more than thirty series of drying equipment, environmental equipment, equipment of evaporation and concentration, and equipment of pressure vessels, which are widely used across industries such as pharmaceutical, chemical, food, environmental, mining, building materials, and military. Our products are used over all the country and overseas as well. We have exported our machine to more than 40 countries and regions such as Europe and the United States. We have experience of cooperating with a few dozens of listed companies and we are a recognized supplier of many large multinational groups. Our company has won many prices, such as National High-Tech Enterprise, AAA Credible Enterprise, AAA Qualified Enterprise, Listed Company of the Provincial Equity Center, Drafting Company of the Industry Standards, First National Project Owner, Outstanding Supplier of the Aerospace Technology Group, Jiangsu Science and Technology SME, Jiangsu Private Technology Enterprise, Changzhou Engineering Technology Research Center, Changzhou Well-Known Brand, Second Prize Owner of Jiangsu Science and Technology Award, Second Prize Owner of Petrochemical Federation Ministerial Award, Self-Supported Import and Export Enterprise, etc. Our company also has qualifications required to design and manufacture Class D pressure vessels, certificates for ISO9001 Quality Management System, ISO14001 Environmental Management System, and OHSAS18001 Occupational Health and Safety Management System, and CE certification for some of the products. All of these qualifications have made us a company with core values in the field of drying and environmental equipment.