Industrial High Speed Pressure Centrifugal Spray Dryer for Liquid Material Like Coffee, Milk, Fruit Juice

• After-sales Service: Online After Sales
• Warranty: a Year
• Heating Mode: Convective
• Material Status: Powder
• Atomization: Rotary Atomization
• Flow: Parallel Flow
• Model NO.: YPL
• Heat Source: Electricity, Coal Gas
• Type: Airflow Spray
• Model: 50-1000unit
• Evaporation Moisture: 50-1000kg/H
• Pressure of Pump: 0.5-8MPa
• Power: 8.5-30kw
• Inlet Air Temperature: 300-350
• Transport Package: Wooden Box
• Specification: according the size of machine
• Trademark: CHANGJING
• Origin: China
• HS Code: 84199090
• Production Capacity: According Your Capacity

Product Description

Descriptions

The pressure spray dryer uses the pressure atomizer to atomize the solution or slurry materials into fine droplets with the help of the pressure of the pressure pump, so as to significantly increase the surface area; Fast drying through full heat exchange with hot air(tens of seconds to tens of seconds), so as to obtain powder or fine particle products.

Features

Fast drying speed, especially suitable for heat sensitive materials:

The product is powder granule with uniform particle size, good fluidity and solubility;

It can be used in a wide range, such as hot air drying, granulation, cooling granulation, etc;

It can be equipped with a fine powder return and wet agglomeration system to properly adjust the requirements for material particle size:

Simple and stable operation, convenient control, easy to realize automatic operation, and the product particle size, bulk density and moisture can be adjusted within a certain range.

Applications

Food, medicine, chemical industry, dyeing, ceramics, biochemistry, pesticides, plastics and other applicable liquids with corresponding fluidity.

Structure Diagram

Technical Specification

 

 

Model	Unit	50	100	150	200	300	500	4600×22500
Evaporated Moisture	kg/h	50	100	150	200	300	500	4600×22500
Overall Size(ø*H)	mm	1600×8900	2000×11500	2400×13500	2800×14800	3200×15400	3800×18800	4600×22500
Pressure of Pump	MPa	0.5-8
Power	KW	8.5	14	22	24	30	82	30
Temperature of Inlet Air	ºC	300-350
Recovery of Raw Material	%	≥97
EHeating by Electricity	KW	75	120	150	When the temperature is lower 200ºC,the specificatione should be  calculated according to specfic stiuation.
Electricity+Steam	MPa+KW	0.5+54	0.6+90	0.6+108
Hot Blast Stove	Kcal/h	100000	150000	200000	300000	400000	500000	1200000